DIY Evergreen Wreath Kits

So glad you have decides to take up the tradition of making your own wreath for the winter season. There is deep symbology and meaning behind evergreen wreaths, as well as being beautiful and fun to make. The kit will make you one 14-15’ wreath, filled with lovely textures, smells and pops of festive colour. All the botanicals ingredients are grown or foraged right here in the Margarees, reminding us that  we don’t need items shipped in from around the world to fill our homes with beauty this holiday season. I hope you find this process as enjoyable and relaxing as I do. Have fun and be kind to yourself if this is your first time making a wreath!

In the box you will find:


Willow wreath base

Fresh greenery

Rose hips

A bundle of dried botanicals

Velvet ribbon

Pine cones

Spool of jute twine

Length of wire

 Prepare your greenery and botanicals 

The greenery needs to be broken down into smaller sections to make your wreath. Using sharp kitchen scissor or garden secateurs, snip the greenery into 3-5” lengths, making as many good looking and usable pieces as you can. Spruce and Fir naturally have little fingers and hands that you can snip right off the main stem.  Caution: Cutting pieces longer than the 3-5” recommendation will likely result in not having enough greenery to finish your wreath.  

Trim the dried botanicals likewise, into 3-5” lengths. Some stems can be broken down into lots of pieces and some may be only single headed.


 Starting your wreath 

First start by tying your twine to your wreath base with a sturdy double knot.

Next, taking some of your greenery and a few botanicals, create a little bundle, or bouquet Laying the bundle flat on top of your wreath base, wrap the twine around the bottom half of the bundle once or twice, securing it to the wreath base. Aim to have your twine nice and snug, but beware of pulling it so tight you snap the stems of the dried botanicals ( they are more fragile). One tip is to always cushion your dried botanicals with a piece of greenery between the dried stem and the twine as a bit of a cushion. Do not cut the twine, you will continue wrapping each bundle on in one long continuous piece of twine.  Keep  your twine tidy and coiled close on its spool.

 Continuing on 

Continue making little bundles of greenery and botanicals, laying the next bundle in the same direction as the first bundle, so it is overlapping the stems of the previous one and in this way you never see the twine or the stems of the portion of the wreath you have completed. 

Work your way around the wreath until you get back to where you started.

 Finishing off your wreath 

When you near the end of the wreath, check the back to see where the twine started. To get an even and completed wreath, you will have to wrap bundles onto the wreath base, right up to that spot. The last few bundles can be frustrating and tricky. Take your time, making sure to tuck the stems of the last bundle behind the first bundle. Make sure not to wrap any of the stems from the very first bundle into the binding of the very last bundle. Cut your twine, giving yourself a good 12-14” left attached to the wreath so that you can tie it off to the wreath base and make yourself a loop to hang it, if you wish. Using any leftover greenery and botanicals, you can push their ends into the wreath, filing in any gaps or just adding extra material where you wish.

 Add your ribbon and Pine cones 

Cutting a 3-4’ piece of wire, wrap it around one end of the pine cone and twist to tighten and secure. You are now able to secure the pine cone in your wreath by twisting the wire around a branch or poking it into the wreath base. Repeat with the 2nd pine cone. 


There are endless way to embellish your wreath with a ribbon. Play around with it! A single bow with long tails is a classic.  You can attach it at the top, bottom, side, anywhere really! You can also use the ribbon to loop through the centre of the wrath and hang it that way. A few small bows might be appealing. Use the wire in the same way as above to attach your ribbon to your wreath.

 Care and disposal 

The best place to keep your wreath is in a cool dry spot. A covered outside door provides the perfect environment for a long lasting wreath. If you choose to display it inside, please keep in mind that the warm dry environment in our houses in winter will dry out the evergreens and they may shed their needles. If you DO want to hang it indoors, consider putting it in a place that it won’t get jostled about and away from furnace or heat pump vents that will blow drying air on it. You can also take it outside and mist it with water once a week to help keep it hydrated


Once you are done enjoying your wreath, you can simply remove the ribbons and wired pine cones and compost it. It is designed to go back to the land at the end of it’s life. However, that doesn’t  have to be the end! You may also choose to unwind it, sort out the dried botanicals, and, using just them, remake your wreath, giving it a new like and purpose. The wreath base and botanicals will likely be in good condition for a long time still.